What this is

A strap/band clamp wraps a single continuous band around an entire workpiece and tensions it evenly, instead of squeezing from two fixed jaw points — the right tool for round, irregular, or multi-sided glue-ups (picture frames, round tabletops, octagonal boxes) that a bar or parallel clamp can’t reach around. The POWERTEC 71017 is one of the more commonly stocked strap clamps in this category.

Full specs

SpecValue
Model71017
Strap1" wide x 13 ft long, high-grade nylon webbing
Corner brackets1-1/4"
FrameDurable plastic frame with non-marring clamping jaws
MechanismQuick-release lever for fast setup; hand screw for fine tightening/adjustment
Rated shapesSquare, round, rectangle, and irregularly shaped workpieces
WeightNot published in the listings we checked
ASINB00NJ023YO

Source: cross-referenced retailer listings (Amazon and Walmart listings, plus a POWERTEC dealer distributor page) that consistently describe the same 1" x 13 ft nylon strap, 1-1/4" corner brackets, and quick-release-lever-plus-hand-screw mechanism. POWERTEC’s own product page for this specific model wasn’t directly fetchable at the time we checked, so this is a retailer cross-reference rather than a direct manufacturer-page source.

POWERTEC 71017 Strap Clamp

Plastic frame with non-marring clamping jaws; high-grade nylon strap · 1" wide x 13 ft nylon strap · 1-1/4" corner brackets · Quick-release lever plus hand screw for fine tightening

Manufacturer markets it for picture frame, furniture, cabinet, and drawer assembly — handles square, round, rectangular, and irregularly shaped workpieces that a bar or parallel clamp can't wrap around.

View Price on Amazon

Who this is for

Round or irregularly-shaped glue-ups — picture frames, round tabletops, multi-sided boxes — where a bar or parallel clamp’s two-point squeeze can’t wrap around the piece at all. A single strap tensioning evenly around the whole workpiece solves a problem no other clamp type on this site does.

Who this isn’t for

For simple two-board glue-ups or panel work, a bar or parallel clamp gives more concentrated pressure at the joint — a strap clamp’s even, distributed tension is a different tool for a different shape problem, not a general substitute.

Bottom line

This is a retailer-cross-referenced spec writeup, not a hands-on test — we haven’t wrapped a physical glue-up with this and checked tension evenness around the piece. On paper it’s a standard nylon strap clamp built for shapes other clamp types can’t reach around. POWERTEC 71017 Strap Clamp if your glue-up is round, multi-sided, or otherwise irregular.