Why edge work needs a different clamp
Veneer and edge-banding both need pressure applied perpendicular to a thin edge — not the face-to-face pressure a bar or parallel clamp applies. An edge clamp’s jaw design pinches directly onto that edge, holding the piece being applied flat against it without needing a caul.
Comparison
| Rockler Bandy Clamp — Small | Rockler Bandy Clamp — Large | |
|---|---|---|
| Dimensions | 2-3/4" W x 5" L | 5" W x 8-3/4" L |
| Max jaw opening | 1-1/4" | 2-5/8" |
| Throat depth | 1-7/8" | 3-3/4" |
| Material | High-strength nylon with fiberglass fill; rubber band jaw | Same |
| ASIN | B0749KK76X | B0749K1HNP |
Rockler Bandy Clamp — Small (2-pack)
Manufacturer markets it for thinner stock and delicate moldings — one-handed spring-clamp operation with the even, non-denting pressure of a rubber band jaw.
View Price on AmazonRockler Bandy Clamp — Large (2-pack)
Same rubber-band jaw design as the small size, scaled up for thicker edge stock — pivoting jaws accommodate angled pieces for full pad contact.
View Price on AmazonWhich size to buy
The small size’s 1-1/4" jaw opening covers most edge-banding on standard 3/4" panel stock; the large size’s 2-5/8" opening is for thicker edges — countertops, thick tabletops — where the small size’s jaw simply won’t open far enough to reach. If you’re not sure which you’ll need more of, the small size covers more common panel-thickness work.
Bottom line
Both sizes share the same nylon-and-rubber-band construction, so the decision is really about jaw opening matching your material thickness, not a quality tradeoff between the two. Rockler Bandy Clamp — Small and Rockler Bandy Clamp — Large .